Axxexs
Ordinary man doing extraordinary things
- Gick med
- 11 Dec 2003
- Ort
- Verkstan
- Hoj
- Technical Sports Racing AC28-M Prototype powered by Honda Racing Corporation
Chrille skrev:Det var nästan det jag misstänkte. Är det alltså frågan om hu mycket moddar man har gjort på ramen då?? Kitsving och förstärkningar osv....
2.4.6.1 Maine Frame Body
The main frame must remain as orginally produced by the manufacturer for use on the homologated machine.
The main frame may only be altered by the addition of gussets or tubes. No gussets or tubes may be removed.
All motorcycles must display a vehicle identification number on the main frame body (chassis number).
Rear sub frame may be changed or altered, but the material must remain as homologated.
The paint scheme is not restricted.
2.4.6.3 Rear Fork (Swingarm)
The rear fork may be altered or replaced from those fitted to the homologated motorcykle. The use of carbone fibre or KevlarÒ materials is not allowed if not homologated on the original machine. A chain guard must be fitted in such a way to reduce the possibility that any part of the riders' body should become trapped between the lower chain run and the rear wheel sprocket.
Rear wheel stand brackets may be added to the rear fork by welding or by bolts. Brackets must have rounded edges (whit a large radius). Fastening screws must be recessed.
2.4.6.4 Rear Suspension Unit
Rear suspension unit can be changed but a similar system must be used (i.e. dual or mono).
The rear suspension linkage may be modified or replaced.
Last edited: