Man trycker bara på lilla röda knappen som sitter på sladden! Bifogar en manual in English då da...
USER'S MANUAL TG 400
A INSTALL THE SYSTEM
Please following the illustration to install, the press black button beside left of the audioalarm
and it will ring long twice meaning the system is installed.
B - BASIC FUNCTIONS OF BUTTONS
1. Anti-thief setting: Press button (A) to set anti-thief system on. And the audio-alarm will
ring once meaning the system is on.
2. Anti-thief setting off : Press button (B) to release all the function and the audio-alarm will
ring short twice.
3. Searching motorcycle: Press button (C) to search your motorcycle. And the audio-alarm
will ring 6 seconds
4. Audio-alarm length adjusting: Reference step D.
C - SENSITIVITY ADJUSTING :
1. Press button (A) and (B), DO NOT release until you hear audio-alarm ringring long twice.
Then press button (A) again to adjust the sensitivity.
2. Press button (A) to low down 1 degree each time
(circulate adjusting from 1 degree to 8 degrees)
3. When you are adjusted, you will hear audio-alarm once at 1 degree. The audio-alarm will
ring short once when the degree are from 2 to 8 degrees.
4. As long as you have'got the sensitivity you want, press button (B) to make it done.
D AUDIO-ALARM LENGTH ADJUSTING:
1. Press button (A) and (B) DO NOT release until you hear the audio-alarm ringing long
twice. Then press button (D) again to adiust the alarm length,
2. Press button (D) to adjust 2 second shorter of the alarm length each time (30 to 16 seconds
circulate adjusting ).
3. When you are adjusting, you will hear audio-alarm ringing long once at 30 seconds of the
alarm length and the audio-alarm will ring short once when the alarm length are from 29
to 16 seconds.
4. As long as you have got the alarm length you want, press button (B) to make it done.
E - ADJUSTING THE POWER SUPLLY TURN ON/OFF
1. Press button (B) and (D), DO NOT release until you hear audio-alarm ringing long three
times meaning ihe power supply is turned off.
2. When you want return the power supply. Press black button beside left of the audio-alarm,
you will hear the audio-alarm ringing twice meaning the power supply is returned on.
