Nitrous
www.actionpics.se
Hjälp mig tolka reglementet till superstock 600 när det gäller bromsskivor 2010. Så här står det i reglementet,
Front and rear brake discs including their suspension may be changed but must fit the original calliper and mounting. However, the outside diameter of the brake discs and the ventilation system must re-main as originally produced by the manufacturer for the homologated machine. A tolerance of +/-1.5 mm for the outside diameter is accepted. A tolerance of up to +1.5 mm is accepted for the width of the brake discs, the minimum dimension which is eventually indicated by the corresponding manufacturer as wear limit according to the homologation for the corresponding model. Internally ventilated discs are not allowed as after market part. Replacement brake discs must be of ferrous material. The brake discs may have a floating suspension, floaters are free. Front and rear brake callipers as well as all the mounting points must remain as originally produced by the manufacturer for the homologated machine.
Ska man tolka detta som att man får byta bromsskivor till Galfer som exempel? Blir osäker när jag läser det som står om ventilation och "ferrous material"!
/Nitrous
Front and rear brake discs including their suspension may be changed but must fit the original calliper and mounting. However, the outside diameter of the brake discs and the ventilation system must re-main as originally produced by the manufacturer for the homologated machine. A tolerance of +/-1.5 mm for the outside diameter is accepted. A tolerance of up to +1.5 mm is accepted for the width of the brake discs, the minimum dimension which is eventually indicated by the corresponding manufacturer as wear limit according to the homologation for the corresponding model. Internally ventilated discs are not allowed as after market part. Replacement brake discs must be of ferrous material. The brake discs may have a floating suspension, floaters are free. Front and rear brake callipers as well as all the mounting points must remain as originally produced by the manufacturer for the homologated machine.
Ska man tolka detta som att man får byta bromsskivor till Galfer som exempel? Blir osäker när jag läser det som står om ventilation och "ferrous material"!
/Nitrous