rasmussen
Guest
Jag har en liten fråga om det här ämnet. När man läser vissa installationsbeskrivningar utav slipon så står det ibland att ommappning/pc inte behövs om Db-killersna får sitta kvar. Stämmer det? Det vore guld värt för min del som har 30mil till närmsta KTM-mek. Isf kan jag vänta med det tills hojen ska in på stor service.
Ett exempel är Wings http://www.wings.si/ver3/slikarije/Installation.pdf
Ett exempel är Wings http://www.wings.si/ver3/slikarije/Installation.pdf
wings.si skrev:WINGS silencers (with dB-killers fitted) are designed to operate without the need to remap
the EFI. If your KTM is a model fitted with a carburettor you should lift the needle(s) one
notch. If you have a model fitted with an EFI system and you want to increase
performance or you want to remove the dB-killers you should use a Power Commander
box, or remap the EFI using the KTM-Akrapovic map for non-catalyst bolt-on silencers.
Last edited: